Promotional stickers, A5
Related products
Promotional stickers, A5
Similar products
Artwork information Promotional stickers, A5
- Data format (incl. 2 mm bleed): 15,2 x 21,4 cm
- Trimmed size: 14,8 x 21 cm
- Special requirements for creating the artwork:
- Please observe the following for stickers/films:
- white elements cannot be printed
- the lighter the print colour, the more transparent does the film seem
- the motif is printed right-reading (self-adhesive side on the reverse of the motif)
- if a motif is applied to the inside of a window to be seen from the outside, the print files must be created as mirror image.
- Please observe the following for stickers/films:
- Resolution: 300 dpi
- Include a surrounding trim of 2 mm, important information should be at least 4 mm from the edge of the final format size
- Fonts must be completely imbedded or converted to curves
- colour mode: CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
- Maximum colour application of 300 %
- We will not check for spelling and/or typographical errors
- We will not check for overprint settings
- Transparencies created with CorelDRAW must be reduced
- Comments will be deleted and not printed
- Form field content will be printed
Product details
- Four-colour print on the front, reverse blank (4/0)
- permanently adhesive
- Note: white is not printable on clear stickers, i.e., any white areas in the print template will become transparent.
- Important: for production-related reasons we cannot guarantee that the carrier material will be slit, especially for small sizes.
- Indoor stickers: (suitable for indoor usage)
- 73 gsm adhesive paper, matt uncoated, writeable, back side pre-cut
- 80 gsm adhesive paper, glossy coated, back side pre-cut
- 80 gsm adhesive paper, matt coated, back side pre-cut
- Outdoor stickers: (suitable for outdoor usage)
- waterproof 90 µm polypropylene film, glossy print with UV-cured inks
- Important: The printing inks are not suitable for permanent outdoor use.