Pinback buttons, 5.2 x 5.2 cm
Artwork information Pinback buttons, 5.2 x 5.2 cm
Data format: 6.20 x 6.20 cm
Trimmed size: 5.20 x 5.20 cm
Resolution at least 300 dpi for an original image size of.
Include a surrounding trim of 5 mm, important information should be at least 2 mm from the edge of the final format size
Fonts must be completely imbedded or converted to curves.
colour mode CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
Maximum colour application of 300%
We will not check for spelling and/or typographical errors.
We will not check for overprint settings.
Transparencies created with CorelDRAW must be reduced.
Comments will be deleted and not printed.
Form field content will be printed.
Single-sided colour print (4/0) back blank
Sheet metal badges to fasten by means of a pin on the back
The front has a glossy or matt film lamination
Make sure to add 5 mm bleed on all sides of your artwork in addition to the final dimensions.
For round designs, we recommend buttons from 37 mm as such designs may appear off-center on 25 mm buttons due to the production process.
Only one motif can be uploaded for each print order.