

Artwork information Milled letters
- Free format selection:
- Width: min. 20 - max. 305 cm
- Height: min. 15 - max. 152 cm
- Special requirements for creating the artwork:
- Step 1: when creating your file, leave a 1 cm bleed all around.
- Step 2: create your letters with a minimum distance of 2 cm between them. Also observe a minimum height of 15 cm per letter and a minimum width of 2.5 cm for a "foot". The cutter of our milling machine is 4.1 mm thick, for Forex® 5 mm we use a 6.1 mm cutter.
- Step 3: select the letters and change the outlines to the spot colour "Cutcontour". Switch off the letter fill.
- Step 4: if your letters are to be printed, fill the entire background with your design. This also creates the bleed. For milled letters without print, the file with the cutting contour is sufficient.
- Include a surrounding trim of 10 mm, important information should be at least 4 mm from the edge of the final format size
- Resolution: 150 dpi
- colour mode: CMYK, FOGRA51 (PSO coated v3) for coated paper
- We will not check for spelling and/or typographical errors
- We will not check for overprint settings
- Fonts must be completely imbedded or converted to curves
- Comments will be deleted and not printed
- Form field content will be printed
Product details
- Four-colour print on the front, reverse blank (4/0)
- milled letters for company logos, signage or decorative applications
- individual letters with individual contour, precisely milled
- material for outdoor use: 3 mm aluminium composite panel, 5 mm Forex®, 3 mm PVC foam board or 4 mm Sign Again®
- material for indoor use: 10 mm or 16 mm Re-Board®
- best mounted with spacers, these are not included
Safety and manufacturer details
Probo Print GmbH
Havelandoweg 2
9101 PR Dokkum
Contact
E-mail: safety@onlineprinters.com