Folders with tuck tab flaps, A4
Artwork information Folders with tuck tab flaps, A4
- Data format (incl. 2 mm bleed): 54,1 x 44,2 cm
- Trimmed size: 53,7 x 43,8 cm
- Trimmed size (closed): 22 x 30,6 cm
- Special requirements for creating the artwork:
- Please remove the die line fom the download template before generating your printfiles.
- Please provide a second file (view file) to specify the position of the die line.
- When choosing partial finishes , such as UV coating or relief coating, you have to create a separate colour swatch with the required designation in the artwork file.
- Resolution: 300 dpi
- Include a surrounding trim of 2 mm, important information should be at least 4 mm from the edge of the final format size
- Fonts must be completely imbedded or converted to curves
- colour mode: CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
- Maximum colour application of 300 %
- We will not check for spelling and/or typographical errors
- We will not check for overprint settings
- Transparencies created with CorelDRAW must be reduced
- Comments will be deleted and not printed
- Form field content will be printed
- Four-colour print on the front, reverse blank (4/0)
- optionally available with an additional spot colour (5/0)
- Please note that film lamination may impair the possibility to write on the finished surface.
- delivered die-cut/creased and flat