Postcards with spot finish, Maxi

Data format (incl. 2.00 mm bleed): 12.90 x 23.90 cm

Trimmed size: 12.50 x 23.50 cm

Resolution at least 300 dpi for an original image size of.

Include a surrounding trim of 2 mm, important information should be at least 4 mm from the edge of the final format size

Fonts must be completely imbedded or converted to curves.

colour mode CMYK as with FOGRA51 (PSO Coated v3)

Maximum colour application of 300%

We will not check for spelling and/or typographical errors.

Please pay attention to the reading direction when creating your print files

We will not check for overprint settings.

Transparencies created with CorelDRAW must be reduced.

Comments will be deleted and not printed.

Form field content will be printed.

To be noted for spot UV varnish and relief varnish:

partial finishing is only possible on the front.

Relief varnish is available as a glossy finish only

All objects of the full tone “coating” must be 100 % as well as set on over printing

lines need to be at least 3 points (1.06 mm) wide

Font size min. 14 pt. – the thinnest line has to be have a width of at least 1 mm

Empty space between objects and the relief varnishing: 3 points (1.06 mm)

Min. 3 mm distance between the relief varnish and the trimmed size of the product, as well as any stamping, groove or crease lines

Colours may appear differently because of the varnish

Film argenté partiel

partial finishing with silver foil is only possible on the front.

All objects of the full tone „silver“ must be 100 %

Lines need to be at least 3 points (1.06 mm) wide.

Font size needs to be at least 14 pt –  the thinnest line needs to be at least 1 mm wide.

Minimum distance between the edge of the final format and spot finished elements: 2 mm

Minimum distance between spot finished elements: 3 dots (1.06 mm)